- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
Likewise, how do I reset my ECU?
Also know, how do I reset my 2018 Range Rover?
People ask also, how do I reset my 2012 Range Rover Sport?
Also, how do you reset the EPB on a Range Rover Sport? If the battery has been discharged or disconnected, Apply Foot And Park Brake will be displayed in the Message center when the ignition is next switched on. Press the brake pedal and pull the EPB switch up to apply the EPB. This is required to reset the EPB system. The EPB will now function correctly.
Contents
How do I reset my ECU manually?
How do you reset the service on a Range Rover?
Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.
How do you reset the service light on a 2015 Range Rover Sport?
How do you reset the service light on a Range Rover Sport 2018?
How do you reset the service light on a 2013 Range Rover Sport?
- Key on, engine OFF.
- Open door.
- Open bonnet (hood)
- Depress the accelerator pedal simultaneously for ten seconds, release.
- service interval is now reset.
How do you reset the service light on a 2009 Range Rover?
How do you reset the maintenance light on a 2013 Range Rover Evoque?
What is EPB reset?
EPB Reset Resets the cable if the Emergency release cable has been activated. EPB Un-jam Allows the EPB to be un-jammed when the vehicle has entered a state where the brakes screech when applying the Parking Brake, the rear brakes squeak or rub when the vehicle is moving or there is evidence of shoe-drag.
What is HDC fault system not available?
A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.