- Turn off the cars ignition.
- Hold down the reset button on the dash board to zero the mileage.
- Turn the cars ignition on, but do not start.
- A menu will come up, like date/mileage.
- Let go and then press the button again.
- It will toggle through some options, then get to rst.
People also ask, how do you reset the service light on a 2016 Range Rover Sport?
Another frequent question is, how do you reset the service light on a 2015 Range Rover Sport?
Furthermore, how do you reset the service light on a 2014 Range Rover Sport?
- Open the bonnet.
- Turn the ignition key to the “ON” position without starting the engine.
- Open the driver’s door.
- Hold the accelerator and brake pedals all the way down.
- Turn the ignition OFF and start the engine to verify the indicator has been reset.
Also know, how do you reset the service light on a 2013 Range Rover Sport? To reset this message, 1; open the hood, 2; turn the ignition on by pushing the start button with your foot off the brake, 3; push the brake pedal and accelerator pedal for 30 seconds, 4; let off the pedals and turn the ignition off. Close the hood and you are good to go.Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.
How do you reset the service light on a 2012 Range Rover?
How do you put a Range Rover in service mode?
How do you reset the service light on a 2015 Range Rover Evoque?
How do you reset the service light on a 2009 Range Rover?
How do you reset the service light on a 2013 Range Rover Evoque?
How do you reset the service light on a 2008 Range Rover Sport?
What does it mean when the service indicator light is on?
The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.