Keep holding the Prius trip reset button and turn your key back towards the “Off” position. Turn your Prius key to the “On” position. Continue holding your Prius reset button until you see the number near the odometer reach 0. You’ve succeeded in resetting your Toyota maintenance light!
Amazingly, how do I reset the maintenance required light on my Prius? Turn the vehicle completely off. Press and hold the “Trip” button. Continue to hold the “Trip” button while turning the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
As many you asked, how do you reset the maintenance light on a 2009 Toyota Prius? To reset your prius simply press the power button once to power your prius down. Press and hold down the odo button and press the power button twice (2x) with your foot off the brake.
Subsequently, how do you reset the oil maintenance light on a 2015 Prius?
Frequent question, how do I turn off the maintenance required light?
Contents
How many quarts of oil does a 2009 Prius take?
Capacity: 3.9 quarts (with filter)After refill check oil level.
How do you reset the oil light on a 2011 Toyota Prius?
How do you reset the maintenance light on a 2016 Toyota Prius?
- Turn on the car without starting the engine. Press twice the power button without step on the brake.
- Go to the ⚙️ Settings.
- Scroll down to the VEHICLE SETTINGS.
- Press the centre or OK button.
- Select MAINTENANCE SYSTEM.
- Select OIL MAINTENANCE.
- Select YES.
Why is my maintenance required light still on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do you turn off the maintenance required light on a Toyota push start?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
How do you reset the maintenance light on a Toyota?
Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out. Once off, release the odometer button and start the car.
How do you reset the maintenance light on a Toyota Prius C 2018?
Go to vehicle settings and click ok. Select the option for the maintenance system. Go to oil maintenance and click yes to reset the oil maintenance light. This light is an indicator used to remind You to have Your oil changed.
What type of oil does a 2009 Prius need?
The recommended oil grade for use in the Prius is 5W-30. Most owners prefer synthetic and swear by it as an MPG enhancer over conventional “dino” motor oil. There is no one particular brand of oil or filter that is preferred for use in the Prius.
How many quarts of oil go in a Toyota Prius?
The engine’s oil capacity is about 4.4 US quarts, and it requires an oil viscosity of 0W-20. To change your Toyota Prius oil, expect the repair to take from 25 to 35 minutes, assuming your vehicle is already raised and the required tools and parts are ready.