Toyota Prius

How to reset the maintenance required light on a 2008 toyota prius?

In this regard, how do you reset the maintenance required light on a Toyota Prius? Turn the vehicle completely off. Press and hold the “Trip” or “MPH” button. Continue to hold the “Trip” or “MPH” button while switching the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.

Likewise, how do you put a Prius 2008 in maintenance mode?

Beside above, what does the maintenance required light mean on a 2008 Toyota Prius? The “Maintenance Required” indicator on the dash of a Toyota Prius isn’t an indication of a serious problem. It’s simply an indicator used to remind you to have your oil changed. After having your oil changed or changing your oil yourself, you’ll want to reset it so that it won’t continually illuminate.

Additionally, how do you reset the maintenance light on a 2009 Toyota Prius? To reset your prius simply press the power button once to power your prius down. Press and hold down the odo button and press the power button twice (2x) with your foot off the brake.

Contents

How do you reset the maintenance required light on a 2007 Toyota Prius?

What does Prius maintenance mode do?

Putting your Toyota Prius into maintenance mode – getting the engine to stay running. … Normally the engine only runs to either warm itself up or if the driver is requesting more power, but if you want the engine to idle you’re stuck.

Why won’t my Toyota Prius turn off?

When your Prius won’t shut off, the most common cause is the combination meter. The combination meter is the gauge with green LEDs behind the steering wheel. It has the speedometer, fuel gauge, and shift selector position as well as a few other things.

Why is my maintenance required light still on after oil change?

Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.

How do I turn off the maintenance required light?

Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

How do you turn off the maintenance required light on a Toyota push start?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.

How do you reset the maintenance light on a 2006 Toyota Prius?

To reset the oil maintenance light press the display until it reads the odometer reading, turn the power switch off, press the power switch to ignition on while holding down the trip meter reset button, keep the trip reset button held down for about 10 seconds , the display will read 000000 and then the light will go …

How many quarts of oil does a 2009 Prius take?

Capacity: 3.9 quarts (with filter)After refill check oil level.

How do you reset a 2008 Prius?

How do you reset the maintenance light on a 2014 Prius?

See also:   How to start toyota prius with dead battery?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!