Furthermore, how do you reset the maintenance required light on a Toyota Prius? Turn the vehicle completely off. Press and hold the “Trip” or “MPH” button. Continue to hold the “Trip” or “MPH” button while switching the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
Frequent question, how do you reset the code on a 2008 Prius? Hold down your car brake and press the power button to turn the car on. Continue holding down the brake, as you press the odometer trip button. Turn the car off while holding the ODO button and brake. After doing so, turn the car back on one more time while still on brake and ODO.
Best answer for this question, how do you reset the maintenance required light on a 2007 Prius? To turn off the maintenance required light on Your 2007 Toyota Prius hold in the brake and press the start until the car turns on. With the odometer displayed, not the trip meter, press and hold the ODO trip reset button.
In this regard, how do you put a Prius 2008 in maintenance mode?
To reset your prius simply press the power button once to power your prius down. Press and hold down the odo button and press the power button twice (2x) with your foot off the brake.Contents
How do you reset the maintenance light on a 2015 Prius?
How do you reset the code on a Prius?
- Connect the scan tool to the onboard diagnostic connector. This is found under the steering column.
- Press the READ button on the scan tool, and look for any error codes.
- Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.
How do you reset the computer on a Prius?
- Disconnect battery cables, first negative, then positive.
- Cover and protect the battery posts!
- Turn ignition to position II.
- Connect both battery cables (“SHORT”) for at least 10 minutes.
- Wait 10 minutes – then ignition off, key out.
- Reconnect battery positive, then negative.
- OBC says “PPPP”, reset time.
What does the red triangle mean on a toyota prius?
If You happen to see a red triangle light come on at Your dash in Your Toyota Prius that is its version of a standard check engine light. … The red triangle warning light on a toyota prius is the check engine light and should be brought to a dealership, it could range from low oil pressure to something more serious.
What does the maintenance required light mean on a 2007 Toyota Prius?
The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. … This light is turned on automatically every 5,000 miles as a warning sign, so you don’t forget to change the oil in your car.
How do you reset the red triangle light on a Prius?
To reset the red triangle warning light on a toyota prius, you can disconnect the battery and reconnect it.
How do you reset the maintenance required light on a 2006 Toyota Prius?
Why won’t my Toyota Prius turn off?
When your Prius won’t shut off, the most common cause is the combination meter. The combination meter is the gauge with green LEDs behind the steering wheel. It has the speedometer, fuel gauge, and shift selector position as well as a few other things.
What does Prius maintenance mode do?
Putting your Toyota Prius into maintenance mode – getting the engine to stay running. … Normally the engine only runs to either warm itself up or if the driver is requesting more power, but if you want the engine to idle you’re stuck.