- Release the hood latch and open the hood.
- Unplug the wire harness from the back of the headlight bulb.
- Remove the rubber gasket protector cover the back of the headlight.
- Locate the locking spring on the back of the headlight.
- Remove the old bulb and install the new one.
Also know, how do you change a headlight on a 2011 Toyota Sienna?
Furthermore, how do you change a low beam bulb in a Toyota Sienna? To remove the old bulb, twist the bulb housing counter-clockwise about an 1/8th of a turn until it stops, at which point the tabs in the bulb housing will line up with the slots so that the bulb can be pulled out. Pull out the old bulb. Pull it straight back-out until it clears the headlight.
Another frequent question is, how do you change a headlight on a 2002 Toyota Sienna?
Also, how do you change a headlight on a 2012 Toyota Sienna?
Contents
How do you change a headlight on a 2007 Toyota Sienna?
How do you change a low beam headlight on a 2014 Toyota Sienna?
How do you change a headlight on a 2004 Toyota Sienna?
How do you change a headlight on a 2013 Toyota Sienna?
How do you change a headlight on a 2003 Toyota Sienna?
How do I adjust my headlights?
How do you adjust the headlights on a 2008 Toyota Sienna?
How do you change the license plate light on a 2014 Toyota Sienna?
Where should my headlights be aimed?
The top of the low beam shining on the wall should be at or slightly below the height of the center of the headlight lens for most vehicles. You should expect the light pattern to be higher on the right side (passenger side) to illuminate road signs and lower on the driver’s side to prevent blinding other drivers.
How do you adjust headlights horizontally?
Adjust vertical aim. The horizontal line on the headlights should drop 1-2 inches down from the marked lines when parked 25ft back from the wall. Use the vertical adjustment screw to adjust the height of the headlights as necessary.