To reset the maintenance light in a 2017 toyota sienna first put the vehicle in the on position with the engine off, then hold down the odometer reset button, turn the vehicle off, then back on and it will reset the oil light.
Additionally, how do you reset the maintenance required light on a 2016 Toyota Sienna?
Furthermore, how do you reset the oil light on a Toyota Sienna?
Likewise, how do you reset the maintenance required button on a Toyota Sienna? Press and hold the “Trip” stem button on the odometer. Continue to hold the “Trip” button while switching the ignition to “On” without starting the engine. For push button ignition models, press the button once. Release the “Trip” button when the trip meter is set to all zeros, and you’re done.
Another frequent question is, how do you turn off the maintenance required light on a Toyota push start? Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
Contents
How do you reset the maintenance required light on a 2010 Toyota Sienna?
- With vehicle ignition switched to ON position, make sure odometer reading is shown, then turn the ignition switch to OFF position.
- While holding reset button, switch ignition to ON position.
- Continue to hold the reset button until the odometer displays “000000” and/or the MAINT REQD light goes off.
How do you reset the maintenance required light on a 2012 Toyota Sienna?
How do you reset the maintenance light on a 2011 Toyota Sienna?
To reset the 2011 toyota sienna oil maintenance light put the key in the on position, turn the key off, press and hold the odo/reset button and turn the key back to the on position without starting the engine.
Turn the engine on. Find the TPMS reset button below and to the left of the steering wheel on the instrument panel. Press and hold the button until the TMPS indicator light blinks slowly three times. Wait for several minutes, with the engine running, and then turn the vehicle off.
How do you reset the maintenance required light on a 2007 Toyota Sienna?
Why is my maintenance required light on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
Is the maintenance required light the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.
Why would the maintenance required light come on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
Can I drive with maintenance required light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.