Toyota RAV4

How to turn off maintenance light in toyota Rav4?

Put your key in the ignition and turn it to position one, which is the position right before starting the car. Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out.

Additionally, how do you reset the maintenance light on a Toyota Rav4?

Also know, how do you reset the maintenance required light on a Toyota Rav4?

  1. Press the Left or Right Arrow on the Steering Wheel to Navigate Settings.
  2. Select the Gear Icon on the Multi-Information Display.
  3. Press the Up or Down Arrow and Select Vehicle Settings.
  4. Press the Up or Down Arrow and Select Scheduled Maintenance.

As many you asked, how do you clear the maintenance required light on a Toyota Rav4?

Quick Answer, how do you turn off the maintenance required light on a Toyota Rav4 2021?

Contents

How do I turn off the maintenance required light on my Toyota?

  1. Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
  2. Turn the Vehicle Off and Press the Trip Meter Reset Button.
  3. Turn the Vehicle Back on.
  4. Keep the Reset Button Pressed.
  5. Release the Reset Button.

How do I reset maintenance light on 2015 Rav4?

To reset the maintenance light on a 2015 toyota Rav4, first turn the ignition to on, then set the odometer to read “odo”. Turn ignition to off. Push and hold the trip reset button at the same time turning the ignition back to on.

How do you turn off the maintenance required light on a Toyota RAV4 2020?

How do you reset the maintenance light on a 2013 Toyota RAV4?

What does it mean when my Toyota RAV4 says maintenance required?

The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.

How do you turn off the maintenance required light on a 2011 Toyota RAV4?

How do you reset the maintenance light on a 2018 Rav4?

To reset the maintenance light on a 2018 toyota rav 4: insert the key into the ignition. Press and hold the trip meter reset button. Turn the engine switch to the “on” position. Hold the trip meter reset button until the trip meter displays “000000.” The maintenance light is reset.

How do you reset the maintenance light on a 2014 Toyota Rav4?

How do I turn off the maintenance light?

Why does my Toyota maintenance light keep requiring maintenance?

What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

See also:   How to replace toyota Rav4 side mirror glass?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!