Keep holding the Prius trip reset button and turn your key back towards the “Off” position. Turn your Prius key to the “On” position. Continue holding your Prius reset button until you see the number near the odometer reach 0. You’ve succeeded in resetting your Toyota maintenance light!
You asked, how do I reset my Toyota warning light?
You asked, how do I turn off the maintenance required light on my Prius?
- Hold in the brake and press the start until the car turns on.
- Continue to hold in the ODO while turning car off and on with START while foot on brake.
- The maintenance required light will be out.
Also know, how do you reset the maintenance light on a 2016 Toyota Prius?
- Turn on the car without starting the engine. Press twice the power button without step on the brake.
- Go to the ⚙️ Settings.
- Scroll down to the VEHICLE SETTINGS.
- Press the centre or OK button.
- Select MAINTENANCE SYSTEM.
- Select OIL MAINTENANCE.
- Select YES.
Best answer for this question, how do you reset the dash lights on a 2007 Toyota Prius?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.Contents
How do you reset the maintenance required light?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
How do you reset the maintenance light on a 2015 Prius?
How do you reset the maintenance light on a 2012 Prius?
How do you reset the maintenance light on a 2017 Toyota Prius?
How do you reset the maintenance required light on a 2018 Prius?
How do I reset my Prius computer?
- Disconnect battery cables, first negative, then positive.
- Cover and protect the battery posts!
- Turn ignition to position II.
- Connect both battery cables (“SHORT”) for at least 10 minutes.
- Wait 10 minutes – then ignition off, key out.
- Reconnect battery positive, then negative.
- OBC says “PPPP”, reset time.
How do you reset the red triangle light on a Prius?
To reset the red triangle warning light on a toyota prius, you can disconnect the battery and reconnect it.
How do I turn my check engine light off?
How far can you drive with the maintenance light on?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.
How do you turn off the maintenance required light on a Toyota push start?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.