Jannah Theme License is not validated, Go to the theme options page to validate the license, You need a single license for each domain name.
Toyota Prius

How to reset maintenance light on toyota prius 2007?

You asked, how do you reset the maintenance required light on a 2007 Toyota Prius? To turn off the maintenance required light on Your 2007 Toyota Prius hold in the brake and press the start until the car turns on. With the odometer displayed, not the trip meter, press and hold the ODO trip reset button.

Likewise, how do you reset the maintenance required light on a Toyota Prius? Turn the vehicle completely off. Press and hold the “Trip” or “MPH” button. Continue to hold the “Trip” or “MPH” button while switching the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.

Correspondingly, how do I reset my 2007 Prius?

  1. Disconnect battery cables, first negative, then positive.
  2. Cover and protect the battery posts!
  3. Turn ignition to position II.
  4. Connect both battery cables (“SHORT”) for at least 10 minutes.
  5. Wait 10 minutes – then ignition off, key out.
  6. Reconnect battery positive, then negative.
  7. OBC says “PPPP”, reset time.

You asked, how do you turn off the maintenance required light on a 2008 Toyota Prius?

Contents

How do I turn off the maintenance required light?

How do you reset the maintenance light on a 2015 Prius?

How do you reset the maintenance light on a 2014 Prius?

How do you reset the maintenance light on a 2013 Prius?

How do I reset my Prius battery?

Try pulling over and turning the car off for a few minutes to reset it. If the hybrid check light comes on while you’re driving, pull over somewhere safe. Turn off your car and let it sit for 5-10 minutes. Then, try starting it back up again to reset it.

How do you reset the code on a Prius?

  1. Connect the scan tool to the onboard diagnostic connector. This is found under the steering column.
  2. Press the READ button on the scan tool, and look for any error codes.
  3. Press the ERASE button on the tool to remove the error code. The check engine light will then turn off.

What does the red triangle mean in a Prius?

If You happen to see a red triangle light come on at Your dash in Your Toyota Prius that is its version of a standard check engine light. … The red triangle warning light on a toyota prius is the check engine light and should be brought to a dealership, it could range from low oil pressure to something more serious.

Can I drive with maintenance required light on?

Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.

How do you reset the maintenance required light on a 2005 Prius?

How do I reset my 2006 Prius?

To reset the oil maintenance light press the display until it reads the odometer reading, turn the power switch off, press the power switch to ignition on while holding down the trip meter reset button, keep the trip reset button held down for about 10 seconds , the display will read 000000 and then the light will go …

See also:   Best answer : what is the lifespan of a toyota prius?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!