Additionally, how do I turn off the service required on my Range Rover Evoque?
Also know, how do you reset the service light on a 2015 Range Rover Evoque?
Likewise, how do you reset the service light on a Land Rover? Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.
Furthermore, what does it mean when the service indicator light is on? The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.
Contents
How do you reset the service light on a 2016 Range Rover?
- Key on, engine OFF.
- Open door.
- Open bonnet (hood)
- Depress the accelerator pedal simultaneously for ten seconds, release.
- service interval is now reset.
How do you reset the oil light on a 2013 Range Rover Evoque?
- Turn on the ignition without starting the engine. First, without pressing the brake press the START button to put it into accessory mode.
- Go to the Main Menu.
- Scroll down and select SERVICE MENU.
- Highlight the last option.
- Hold down the ▼ navigation button and the TRIP button.
- Release the button.
How do you reset the service light on a 2011 Range Rover?
How do you reset the service light on a 2009 Range Rover?
How do you reset the service light or indicator on a Land Rover Freelander 2?
How do I reset my service light?
How do you get the service vehicle soon light off?
Cycle ignition switch to ON position and wait 1 minute, then start your vehicle. Check Engine Light or Service Engine Soon Light should be reset and turned OFF.
How do I reset my car with spanner light?
Hold trip reset button in. turn ignition so all the lights on the dash come on… Keep button pushed in untill the inspection symbol turned off.. basically the EML (car/spanner) will reset after 40-odd successful restarts with no fault recurring in that time.
How do you reset the service light on a 2014 Range Rover Sport?
- Open the bonnet.
- Turn the ignition key to the “ON” position without starting the engine.
- Open the driver’s door.
- Hold the accelerator and brake pedals all the way down.
- Turn the ignition OFF and start the engine to verify the indicator has been reset.