Land Rover

How to reset service indicator for land rover freelander 2?

People also ask, how do you reset the service interval indicator 2013 Freelander?

Another frequent question is, how do you reset the service light on a 2010 Land Rover LR2?

  1. Put the key fob into its slot.
  2. Press and hold the TRIP reset button.
  3. Turn the ignition key to the “ON” position without starting the engine.
  4. Keep press the TRIP button until SERVICE indicator start flashing and wait until it stop flashing.

Furthermore, how do you reset service indicator?

Also, how do you reset the service light on a Land Rover? Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Where is the pollen filter on a Freelander 2?

How do you reset the service light on a Freelander?

How do you reset the service light on a 2009 Range Rover?

How do you reset the service light on a 2008 Range Rover?

How do I clear my service light?

Turn the ignition on (warning lights come on) wait about 10-15 sec until most or the lights are off (still pressing odometer reset button) Turn ignition off (button still pressed) and remove the key. Release reset button. Interval should now be reset.

Why is my service light still on after a service?

As mentioned earlier, the service required light is mainly used to remind drivers to change the oil and filter. When the light illuminates, you should take the car to be serviced at your convenience. … After the repair work is done, a reset procedure is usually necessary to turn the light off.

How do you clear a warning light?

  1. Open the hood of your vehicle.
  2. Loosen the nut that holds the negative terminal to the battery with the pliers.
  3. Completely remove the cable from the negative battery terminal.
  4. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.

How do you reset a Land Rover?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.

How do you reset the service light on a 2016 Land Rover Discovery?

How do you reset the service light on a 2011 Range Rover?

Back to top button