- Re-install the oil pan drain plug and torque to 20 ft/lbs.
- Remove the oil filler cap and, using a funnel, fill with six quarts of your preferred engine oil.
- Replace the filler cap when done.
Considering this, how often does a Jeep Wrangler need an oil change? Change that Oil! The Wrangler‘s Owner’s Manual recommends changing the oil and filter when the Oil Change Indicator System alerts you to do so, but recommends intervals not exceed 12 months or 10,000 miles, whichever comes first.
In this regard, how do you change the oil in a 2014 Jeep Wrangler?
Also, how do you change the oil on a 2008 Jeep Wrangler?
You asked, do jeeps take synthetic oil? Does Jeep Use Synthetic Oil From The Factory? This is regular oil and the exact same oil found in your engine when you purchased it from the dealership. If you were to have your Jeep serviced at the dealership they would use this oil. The factory service manual recommends an oil change every 3000 miles.
Contents
How long can a Jeep go without an oil change?
Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.
How many miles does a Jeep engine last?
A Wrangler can typically reach 280,000 miles before significant problems begin to surface. But well-maintained models exceed 20 years and over 400,000 miles. The Wrangler is built for the outdoors and designed to tackle tough terrain, contributing to its longevity.
Is a jeep expensive to maintain?
Jeeps are actually not expensive to maintain. They are almost at par with the national average when it comes to vehicle maintenance costs. This is quite impressive when you consider that it’s a four-wheel-drive with high quality and durable components.
What type of oil is recommended for a 2014 Jeep Wrangler?
The 2014 Jeep Wrangler 3.6L Engine requires MOPAR SAE 5W-20 engine oil or equivalent Pennzoil or Shell Helix are recommended for all operating temperatures. The 2014 Jeep Wrangler 3.6 Liter Engine oil capacity is 6 Quarts (5.6 Liters).
How do you reset the oil life on a Jeep Wrangler?
Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
How much oil does a 2014 Jeep Wrangler take?
Capacity: 6 quarts. (with filter)After refill check oil level.
What kind of oil does a 2008 Jeep Wrangler take?
The 2008 Jeep Wrangler SAE 5W-20 engine oil is recommended for all operating temperatures.
How much oil goes into a 2008 Jeep Wrangler?
Capacity: 6 quarts (with filter)After refill check oil level.
How do you reset the oil change light on a 2008 Jeep Wrangler?
What oil do Jeep dealers use?
Pennzoil® is the only motor oil recommended by the Jeep® brand in North America.