Beside above, how do you reset the oil life on a 2014 Jeep Cherokee? To reset the oil light to the 2014 jeep cherokee, you will turn the ignition to the on / run mode. Move the gas pedal slowly three times in 10 seconds. Change the ignition switch to the lock button. Repeat this process if the indicator appears again after the engine is started.
As many you asked, how do you reset the oil life on a Jeep Grand Cherokee?
- Turn the ignition switch to the ON position, do not start the engine.
- Fully depress the accelerator pedal slowly three times within 10 seconds.
- Turn the ignition switch to the OFF/LOCK position.
Likewise, how do you reset the oil change light on a 2013 Jeep Grand Cherokee?
Similarly, how often should I change the oil in my 2014 Jeep Grand Cherokee? Synthetic oil usually should be changed every 7,500 – 10,000 miles. An oil change is one of the most necessary and necessary services for your car. Jeep recommends getting your 2014 Jeep Grand Cherokee oil & filter changed each 3,000-5,000 miles for conventional oil.Without starting the engine, turn the ignition in the ON/RUN mode position. In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.” Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
Contents
How often should you change the oil in a Jeep Grand Cherokee?
Jeep recommends getting your Jeep Grand Cherokee oil & filter changed every 3,000-5,000 miles for conventional oil. An oil change is one of the most key and dominant services for your car. Synthetic oil continually should be changed every 7,500 – 10,000 miles.
How do I reset my oil life?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the oil light on a 2012 Jeep Grand Cherokee?
Does 2014 Jeep Grand Cherokee require synthetic oil?
The engine oil type used on the 2014 Jeep Grand Cherokee is SAE 5W-20 for both itS3. 6L and 5.7L engines. You can use synthetic oil brands as long as the viscosity is the same as the regular oil You use. The capacity on Your Jeep Grand Cherokee iS6 US quarts on Your 3.6L engine.
How much oil does a 2014 Jeep Grand Cherokee take?
Capacity: 5.9 quarts (with filter)After refill check oil level.
What kind of oil does a 2014 Jeep Cherokee need?
The 2014 Jeep Cherokee 3.2L Engine requires MOPAR SAE 5W-20 engine oil or equivalent Pennzoil or Shell Helix are recommended for all operating temperatures. The 2014 Jeep Cherokee 2.4 Liter Engine oil capacity is 5.5 Quarts (5.2 Liters). The 2014 Jeep Cherokee 3.2 Liter Engine oil capacity is 6 Quarts (5.6 Liters).
Why is my change oil light on when I just changed my oil?
The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.
Why is my oil change light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. … The next common cause is low oil pressure.
How do you reset the oil life on a 2015 Jeep?
Does a Jeep Grand Cherokee require synthetic oil?
The Jeep Grand Cherokee is a vehicle that you usually drive on rough terrains and use for heavy-duty jobs such as hauling or attaching your snowmobile trailer, so most models require synthetic oil.