Contents
How do I reset my Hyundai?
How do I reset my Hyundai Elantra 2018?
How do you reset the 2017 Hyundai Elantra?
How do I reset my 2011 Hyundai Elantra?
Start the vehicle. Press and hold the OK or RESET button for 5 seconds. Release the OK button, then press and hold it again for 1 second. The oil change light will then reset.
How do you reset the computer in your car?
How do I reset my car without disconnecting the battery?
- 3.1 Step 1: Open the hood and disconnect the battery.
- 3.2 Step 2: Locate the car’s fuse box and remove the fuse.
- 3.3 Step 3: Reinstall the fuse and reconnect the battery terminal.
- 3.4 Step 4: Start the vehicle and perform a test run.
The Tpms reset button in a Hyundai Elantra is usually found under or to the side of the steering wheel.
How do I reset my Hyundai Elantra 2020?
Start the vehicle. Press and hold the “OK” or “RESET” button (varies by model) for 5 seconds. Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.
The 2018 Hyundai Elantra TPMS button is placed under the steering wheel. To reset the sensor, holding the tire pressure indicator button until the TPMS light flashes three times, and then release it.
To reset the tire pressure monitor or tpms system in your 2017 hyundai elantra vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.
How do you reset the 2017 Hyundai Sonata?
- Turn the key on. The first thing you want to do you gotta make sure your car is on.
- Go to the SERVICE minder. In the top corner you’ll see as you press the ❏ button it will scroll through the menus.
- Hold down the OK button. Once there you’ll press and hold the OK button and it’ll reset.
How do you reset the tpms on a 2017 Hyundai Sonata?
To reset the tire pressure monitor or tpms system in your 2017 hyundai sonata vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.
How do you reset the computer on a 2010 Hyundai Elantra?
To reset the computer in a Hyundai vehicle, open the hood and use a wrench of pliers to disconnect the positive cable from the battery. Look for the fuse that says ECM on it and remove it. Keep this removed for at least three minutes to clear the vehicle’s memory.
How do I reset my 2013 hyundai elantra?
Turn the ignition to Off and then start the vehicle to verify that the reset has been completed and saved. To reset the oil life light in a 2013 hyundai elantra you will start the vehicle. Press and hold the ok button for 5 seconds. Release the ok button, then press and hold it again for 1 second.
The TPMS reset button is usually located under the steering wheel.