1. Turn the ignition to run (second position)
2. Press slowly the accelerator pedal all the way down three times within 10 sec.
3. Turn ignition OFF.
4. Then turn the ignition to RUN or start the engine to verify if the oil life has been reset.
Contents
How do you reset the oil life on a 2009 Chevy Malibu?
1. Find the OIL LIFE RESET by pressing the INFO button repeatedly.
2. Press and hold the ⏎ button until the ACKNOWLEDGED displayed.
3. At this point, you know you’ve got it done. Just to double-check it just turn the key off and then start the car to confirm that oil life is reset.
How do you reset the oil life on a 2016 Chevy Malibu?
How do I reset my Chevy Malibu?
1. Turn the ignition to the first position. Do not start the engine.
2. Press the accelerator pedal slowly all the way down 3 times within a 5 second interval.
3. Turn the ignition to the “Off” position. For push-button models, press the “Engine Start/Stop” button once without holding the brake.
How do you reset the oil life on a 2011 Chrysler Town and Country?
How do you reset the oil change light on a 2011 Jeep Grand Cherokee?
How do I reset my oil life?
Turn the ignition off, wait a few moments, and then start the engine. Look at the dash to see if the oil light is still flashing or lit. If so, repeat the reset process. If the light is still lit after three reset attempts, contact the manufacturer to learn the correct reset procedure for your vehicle.
How much oil does a 2011 Chevy Malibu take?
The 2011 Chevrolet Malibu oil type and capacity iS5w-30 and 5.5 quarts. Having high quality oil is key for the engine to run smoothly. You will run into issues with the oil at some point.
How do you reset the oil life on a 2008 Chevy Malibu?
How do you reset the oil life on a 2017 Chevy Malibu?
How do you reset the oil life on a 2015 Chevy Malibu?
1. Turn ignition switch to ON position with engine off.
2. Push MENU button on the turn signal switch.
3. Use adjustment wheel and select menu – “Vehicle Information System”
4. Use adjustment wheel and select menu – “Oil Life System”
5. Push SET/CLR button on the turn signal switch and push brake pedal at the same time.
How do you reset the oil life on a 2017 Malibu?
How do you reset car sensors?
1. Open up the hood.
2. Remove the positive terminal cable from the battery using your pliers or wrench.
3. Go to your fuse box in your car, and look at the diagram.
4. Keep the car disconnected like this for two to three minutes to clear the computer’s memory.
5. Insert the fuse back in to the box.
How do I reset my Chevy ECM?
1. Remove the nut from the negative battery cable using a socket set or wrench. Slide the cable off of the battery and set it aside.
2. Turn the headlight switch to the “On” position to drain the ECM of any remaining power. Wait at least 10 minutes, then turn it back to the “Off” position.
Will disconnecting my car battery reset the computer?
Will Disconnecting a Car Battery Reset The Computer? The answer is, maybe. Disconnecting the battery for a short time may not do the trick because the car’s computer, or ECU, still has some current in it. Waiting for over 15 minutes after disconnecting the engine will help ensure the equipment is reset.29 oct. 2019