Range Rover Sport

How to reset service required light on a 2013 range rover sport?

  1. Turn off the cars ignition.
  2. Hold down the reset button on the dash board to zero the mileage.
  3. Turn the cars ignition on, but do not start.
  4. A menu will come up, like date/mileage.
  5. Let go and then press the button again.
  6. It will toggle through some options, then get to rst.

Likewise, how do you reset the service light on a 2013 Range Rover Sport? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

People ask also, how do you reset the service light on a Range Rover Sport?

Also know, how do you reset the service light on a 2012 Range Rover Sport?

Also, how do you reset a 2013 Range Rover?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.
  1. Open the bonnet.
  2. Turn the ignition key to the “ON” position without starting the engine.
  3. Open the driver’s door.
  4. Hold the accelerator and brake pedals all the way down.
  5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

Contents

How do you reset the maintenance light on a 2013 Range Rover Evoque?

How do you reset the service light on a 2015 Range Rover?

  1. Key on, engine OFF.
  2. Open door.
  3. Open bonnet (hood)
  4. Depress the accelerator pedal simultaneously for ten seconds, release.
  5. service interval is now reset.

How do you reset the service light on a 2015 Range Rover Sport?

How do you reset the service light on a 2012 Range Rover Evoque?

How do you reset the service light on a 2016 Range Rover?

How do you reset a 2011 Range Rover?

  1. Press and hold the trip reset button.
  2. Turn the ignition switch on to the ignition position II (one position before starting engine).
  3. If the SII (Service Indicator Interval) function is enabled the information display will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly.

How do you get to the service menu on a Range Rover Sport?

How do you reset a Range Rover?

  1. Go to Settings menu.
  2. Select “Backup & Reset”, select “Factory data reset”
  3. Select “Reset phone” and “Erase everything”
  4. The device will then reboot.

How do I get my Range Rover out of valet mode?

  1. From the Home menu screen, select Valet.
  2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
  3. Valet mode activated is displayed to indicate that a PIN has been accepted.

Why is my Range Rover screen flickering?

There have been issues with the GVIF connector on the back of the screen, and the nav unit itself, getting a light build up and causing the screen to flicker. The GVIF is the video feed between the two modules, and is a single coax style cable with a blue connector.

See also:   How to remove front grill on range rover sport?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!