- Disconnect the battery negative cable by loosening the 10 mm bolt and pulling the negative cable away from the battery post.
- Wait fifteen minutes before you start to work on the airbag system.
- Push the airbag locking pins using a screwdriver.
- Loosen the 21 mm lock nut and remove the steering wheel.
Contents
How do you remove a 2013 Hyundai Elantra steering wheel?
How do you remove the front of a steering wheel?
How do you turn the passenger airbag on in a Hyundai Elantra?
There is a switch in the glove box of the Hyundai elantra. Use this to turn on and off the passenger side glove box.
How do you remove a steering wheel without a puller?
What is the best way to remove a steering wheel airbag?
- Cut Out Battery Power. Firstly, check for the negatively charged cable with the use of the multimeter.
- Removal of Airbag Mounting Bolts.
- Disengage the Wires.
- Finally, Remove the Airbag.
How do you loosen and remove the steering wheel fastener?
Using the proper steering wheel removal tool, loosen the steering wheel on the steering column. Do not hammer on the steering wheel or the steering shaft or use a knock off type steering wheel puller as damage to the steering column will occur. Remove the tool and the steering wheel retaining bolt.
How do you turn the airbag off in a hyundai?
Put the airbag in the Off position: Then it can be in the form of a lock , then you will have to insert the key of your hyundai tucson and turn the key up a notch for disable it. Or it may be under button shape , and then all you need is insert it in the “Off” position.
Why is my airbag light on in my hyundai Elantra?
If your Hyundai airbag light stays on when driving, it means that there is a problem with the airbag system or a sensor has failed. The airbags in your car may not deploy in case of an accident. … The Airbag System does a quick self-check of all the sensors and components.
How do you turn the passenger airbag off in a hyundai Sonata?
The PACOS is usually located in the passenger side of the dash board. It may be on the dashboard itself, in the glovebox or on the side of the dash so that you need to open the passenger door to access the switch. The switch will have two positions ‘on’ and ‘off’.
What does pull the steering wheel mean?
Tire pressure that’s uneven can make your car pull to one side. … One of the most common reasons your car will pull to one side is because the wheel alignment is off. When your wheel and axles aren’t lined correctly you’ll notice your steering wheel – and the whole front of the car – pull to the left or right.
What tools do you need to remove a steering wheel?
- A basic socket set with some ½ inch drive sockets and a ratchet.
- A spanner set.
- Steering wheel puller.
How easy is it to change a steering wheel?
In most cases, you’ll be able to take it off with common tools. But in some cases, you will need a special set since the pattern of the centre lug nut could be different. However, it shouldn’t be very hard to remove it. Your steering wheel is now ready to be replaced.
How do you turn the airbag off on a Hyundai i10?
Put the airbag in the Off position: By default it should be active thus in position ” We ” . Then he surely in the form of a lock , in this case you will have to insert the key of your hyundai i10 and turn the key up a notch in order to disable it.
Is Hyundai affected by airbag recall?
Hyundai has launched a safety recall in the United States regarding the airbag control unit electronic in certain: Model Year 2011-2013 Hyundai Sonata Vehicles. Model Year 2011-2012 Hyundai Sonata Hybrid vehicles.