- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
Correspondingly, how do I get the airbag light to turn off?
- Turn on the ignition switch with your car key.
- Wait for the airbag warning light to turn off.
- Turn the ignition switch of your car back off for a little longer than three seconds.
- Repeat steps 1 through 3 twice to make three times total.
Subsequently, why is the airbag light on in my Jeep? If the airbag warning light illuminates, it could indicate that the sensor has failed and that the airbags might not work properly in a crash. Even if the warning light isn’t illuminated, owners should verify whether their vehicle is affected by this recall.
Similarly, how do you turn off the passenger airbag in a Jeep Wrangler JL? You can’t turn it off, but it has a weight sensor in the passenger seat. If it senses weight in the seat, it will automatically turn on. If it doesn’t sense any weight in the seat, it will stay off.
People ask also, is it illegal to drive with airbag light on? It is not safe to drive with the airbag light ON. When the light is on, it means that there is a problem with the airbag system. When there is a problem with the system, it will not deploy the airbags at all in an accident. It is always recommended to repair the problem as soon as possible.
Will disconnecting the battery reset the airbag light?
Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. … Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.
How much does it cost to reset the airbag light?
Number 1 — Reset Airbag Light You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
What does it mean when the airbag light stays on?
The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.
Will removing fuse disable airbag?
The NHTSA says that you can’t remove or disable the airbags on any registered, road-driven vehicle newer than 1996 without a waiver. … Simply pulling the airbag fuse may not disable the airbags. Many ACMs utilize an internal battery to ensure deployment even if the power is cut.
How do I know if my airbag sensor is bad?
Symptoms of a failing airbag sensor You can easily tell if the sensor is functioning if the airbag warning light on the dashboard is illuminating every time you start the vehicle. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.
How do you turn the airbag light off on a Jeep Cherokee?
Locate the yellow plastic electrical connector and unplug the connector by hand. Find the green plastic electrical connector next to the yellow connector and unplug it by hand in order to disable the Jeep Grand Cherokee airbag.
How do you turn the airbag off in a Jeep Cherokee?
How do you turn off passenger side airbag?
The passenger airbag can be deactivated if the car is equipped with a switch, Passenger Airbag Cut Off Switch (PACOS). The switch for the passenger airbag is located on the passenger end of the instrument panel and is accessible when the passenger door is open.
What does the airbag light look like?
the srs warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person. it will normally light up briefly each time you start your vehicle, and then go off.