Automatic Transmission Fluid Park on a level surface and set the parking brake. Shift the selector level in each position. Then shift it in the “P” position, and run the engine at idling speed. Pull out the dipstick and check the fluid level on the gauge.
Also, how do you check the transmission fluid on a 2013 Subaru Forester?
People also ask, how do you check the transmission fluid in a 2012?
Likewise, how do you check the transmission fluid in a 2011 Subaru Forester? Find the transmission dipstick, which is usually brightly colored and toward the back of the engine. Remove the dipstick, being careful not to spill or drip any fluid. Wipe off the dipstick with a clean rag, just as you would do when checking the engine oil.
Correspondingly, how do you check the transmission fluid on a 2014 Subaru Forester?
Contents
Where is the dipstick for transmission fluid?
First, locate the transmission dipstick, which can be found under the hood, in the engine compartment. Make sure you are locating the transmission dipstick and not the engine-oil dipstick; the transmission dipstick is usually further back in the engine bay, toward the firewall (the bulkhead at the front of the cabin).
How do you check the transmission fluid on a 2010 Subaru Legacy?
What kind of transmission fluid does a 2011 Subaru Forester take?
Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.
How do you read the oil dipstick on a Subaru Forester?
Pull out the dipstick, being careful not to turn it upside down. Read the dipstick by looking for two marks on the bottom that will indicate a full or low level of engine oil. If the oily section of the dipstick falls between these marks, you’re good to go.
Why is there no transmission dipstick?
Automatic transmissions which use World Standard (WS) fluid are sealed and do not consume fluid. This eliminates the need for periodic fluid checking using a dipstick. The transmission fluid does not need to be replaced unless an inspection shows it has become necessary.
How do you check transmission fluid without a dipstick?
What are the signs of low transmission fluid?
- Noises. If your transmission is working properly, you shouldn’t hear any noise while you’re driving as it should transition smoothly.
- Burning Smell. Any foul smell coming from your car should direct you to your nearest service center.
- Transmission Leaks.
- Slipping Gears.
How do you check the transmission fluid on a 2010 Subaru Forester?
Find the transmission dipstick, which is usually brightly colored and toward the back of the engine. Remove the dipstick, being careful not to spill or drip any fluid. Wipe off the dipstick with a clean rag, just as you would do when checking the engine oil.
How do you check the transmission fluid on a 2013 Subaru Crosstrek?
What kind of transmission fluid does a Subaru Forester take?
For automatic transmissions, Subaru recommends using Subaru ATF Idemitsu ATF hp “Dexron iii” type automatic transmission fluid. It is recommended to change Your transmission fluid every 80,000 miles.