Subaru Forester

How much to replace timing belt subaru forester?

The real cost is in the labor, because a lot of parts need to be disassembled to get to the belt. Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).

Best answer for this question, when should the timing belt be replaced on a Subaru Forester? When to replace the timing belt? Every 60k-90k miles. If an engine is equipped with a timing belt, the timing belt must be replaced at the service interval specified by the vehicle manufacturer regardless of whether or not any problem is visible, typically in the range of 60,000 to 90,000 miles.

You asked, how long do timing belts last in Subaru Forester? Subaru timing belts need to be replaced after seven years or 105,000 miles; whichever comes first. Replacement cost starts at $530 (will vary by model)

Moreover, how often should Subaru timing belt be changed? According to its owner’s manual, the timing belt should be inspected for excess wear every 30,000 miles, and replaced no later than 105,000 miles.

Likewise, how do I know if my Subaru timing belt is bad?

  1. You Hear A Ticking Noise Coming From The Engine.
  2. Your Car’s Engine Won’t Turn Over.
  3. You Notice An Oil Leak Near The Motor.
  4. You Experience Exhaust Issues.
  5. Your Revs Start Acting Up.

Having a timing belt replaced before it breaks will cost between $500 and $1,000 on average while waiting for it to break before replacing can cost upward of $2,000 or more. Especially, if there’s other damage that occurred in the process.

How many miles does a Subaru Forester last?

The Subaru Forester is a durable vehicle and can last between 200,000 miles and 250,000 miles. This means with an average of 15,000 miles driven per year, you can expect the Forester to last around 13 – 17 years. This is dependent on proper maintenance and good driving habits.

What happens if a timing belt breaks on a Subaru?

Just like rubber accessory belts under the hood, the timing belt may stretch and crack over time. And since modern Subaru engines are interference engines, that means that a broken timing belt could cause severe damage to the engine!

How often do Subaru timing belts fail?

The timing belt should be replaced as per manufactures recommendation. For Subaru vehicles it is every 105,000 miles or 10 years. If the timing belt service is neglected, major engine damage can result from the belt snapping. When this happens the repair may cost several thousand dollars.

Does Subaru still use timing belts?

Since 2013, all Subaru engines have been equipped with timing chains rather than belts – except for the high-performance Subaru WRX and WRX STI. The WRX got one more year with a timing belt in 2014, and the WRX STI still uses a timing belt to this day.

How much does it cost to replace a timing belt in a Subaru?

The real cost is in the labor, because a lot of parts need to be disassembled to get to the belt. Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).

Does Subaru Forester have timing belt or chain?

The 2019 Subaru Forester comes equipped with a timing chain instead of a timing belt. The chain is designed to last the life of the vehicle, and as a metal part, by default, is more durable. Also because it operates from inside rather than outside the engine, it doesn’t suffer from cracking or drying out like belts do.

How long does it take to change a timing belt on a Subaru?

It usually takes 1-2 days of work because most shops have to pull the engine to do the timing belt.

Can I drive with a bad timing belt?

You can’t exactly ignore this problem if your car won’t start then you can’t drive it. However, if the timing belt breaks while you are driving you will definitely notice and there will almost certainly be additional damage to your engine.

Does a 2010 Forester have a timing belt?

Timing belt or Timing chain? The 2009 and 2010 non-turbo Forester comes with an old-style EJ253 SOHC engine. It has a timing belt that needs to be replaced every 105,000 miles. … The 2009-2013 Forester with a turbocharged EJ255 DOHC engine has a timing belt that also needs to be replaced at 105,000 miles.

When should the timing belt be replaced on a 2016 Subaru Forester?

Although timing belts are critical, there’s no need to replace them regularly –unless explicitly recommended in your subaru owner’s manual. Some automakers recommend changing a timing belt between 60,000 and 100,000, others don’t. Many of today’s timing belts can go 100,000 miles or more without needing to be replaced.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!