Subaru Forester

How much oil 2010 subaru forester?

4.4 quarts. . . . (with filter)After refill check oil level.

Frequent question, how much oil do I put in my 2010 Subaru Forester? SAE 5W-30 is preferred. Capacity: 4.4 quarts. . . . (with filter)After refill check oil level.

Correspondingly, how many quarts of oil does a Subaru Forester take? The 2019 Forester takes 5.1 quarts of oil. Per the manual the 2019 takes 4.4 qts, which is less than older models.

Quick Answer, what is the recommended oil for a 2010 Subaru Forester? The oil type recommended for the 2010 Subaru Forester is 5W-30. The engine oil capacity for the 2010 Subaru Forester is 4.2 US quarts (4.0 liters).

Also the question is, how much oil does a 2.5 liter Subaru engine take? For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts. Again, you’ll want to check the level to make sure you don’t have too much or not enough oil.

How much oil does a 2009 Subaru Forester take?

The 2009 Subaru Forester uses SAE 5w-30 or 5w-20 viscosity fully synthetic engine oil. This car has an oil capacity of 4.4 quarts.

How much oil does a 2011 Forester take?

4.4 quarts. . . . (with filter)After refill check oil level. Torque: 32.5 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.

How much oil does a 2.5 Subaru Forester take?

4.4 quarts. . . . (with filter)After refill check oil level. Torque: 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.

What kind of oil does a 2010 Subaru Outback take?

The oil type recommended for the 2010 Subaru Outback is 5W-30. The engine oil capacity for the 2010 Subaru Outback 2.5 L models oil capacity is 4.2 US quarts (4.0 liters) the 3.6 L models oil capacity is 6.7 US quarts (6.3 liters).

What type of oil does a 2009 Subaru Forester take?

2009 Subaru Forester Oil 5W30 Synthetic. Synthetic 5W 30 Oil GALLON – SOA427V1415 – Genuine Subaru Part.

How do you reset the oil life on a 2010 Subaru Forester?

  1. Switch the Ignition ON.
  2. Using the UP and DOWN arrows located on the steering wheel, within the MENU toggle to SET.
  3. Pull and HOLD the CENTER button until you see the MAINTENANCE menu.
  4. Choose ENGINE OIL from the options.
  5. Press SET.
  6. Type in the mileage you want until the next oil change is due. DONE!

How many quarts of transmission fluid does a Subaru Forester take?

The transmission fluid capacity on the Forester is 9.8 US quarts. If You are also looking for which transmission fluid to use, then Subaru ATF or Idemitsu ATF HP are recommended.

Can I use Mobil 1 in my Subaru?

Is your engine the 2.5 or 3.6? Either way, it doesn’t matter. All that Subaru requires is that it meet API service grade SM or SN, and ILSAC standard GF-4 or GF-5. Mobil 1 meets or exceeds SN and GF-5.

How much oil does a 2009 Subaru Outback take?

SAE 5W-30 is preferred. Capacity: 4.2 quarts. . . . (with filter)After refill check oil level.

How much oil does a 2.5 L Subaru Outback take?

5.1 quarts. . . . (with filter)After refill check oil level.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!