SAE 5W-30 is preferred. Capacity: 4.4 quarts. . . . (with filter)After refill check oil level.
Also, how many quarts of oil does a Subaru Forester take? The 2019 Forester takes 5.1 quarts of oil. Per the manual the 2019 takes 4.4 qts, which is less than older models.
Similarly, what is the recommended oil for a 2010 Subaru Forester? The oil type recommended for the 2010 Subaru Forester is 5W-30. The engine oil capacity for the 2010 Subaru Forester is 4.2 US quarts (4.0 liters).
Likewise, how much oil does a 2.5 L Subaru Forester take? Engine Oil 5.1 quarts. . . . (with filter)After refill check oil level. Torque: 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.
Also know, how much oil does a 2.5 liter Subaru engine take? For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts. Again, you’ll want to check the level to make sure you don’t have too much or not enough oil.
Contents
How do you change the oil on a 2010 Subaru Forester?
How many quarts of oil does a 2009 Subaru Forester take?
SAE 5W-30 is preferred. Capacity: 4.4 quarts. . . . (with filter)After refill check oil level.
What kind of oil does a 2010 Subaru Outback take?
The oil type recommended for the 2010 Subaru Outback is 5W-30. The engine oil capacity for the 2010 Subaru Outback 2.5 L models oil capacity is 4.2 US quarts (4.0 liters) the 3.6 L models oil capacity is 6.7 US quarts (6.3 liters).
How much oil does a 2011 Forester take?
4.4 quarts. . . . (with filter)After refill check oil level. Torque: 32.5 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt.
How do you reset the oil life on a 2010 Subaru Forester?
- Switch the Ignition ON.
- Using the UP and DOWN arrows located on the steering wheel, within the MENU toggle to SET.
- Pull and HOLD the CENTER button until you see the MAINTENANCE menu.
- Choose ENGINE OIL from the options.
- Press SET.
- Type in the mileage you want until the next oil change is due. DONE!
Can I use Mobil 1 in my Subaru?
Is your engine the 2.5 or 3.6? Either way, it doesn’t matter. All that Subaru requires is that it meet API service grade SM or SN, and ILSAC standard GF-4 or GF-5. Mobil 1 meets or exceeds SN and GF-5.
How many quarts of transmission fluid does a Subaru Forester take?
The transmission fluid capacity on the Forester is 9.8 US quarts. If You are also looking for which transmission fluid to use, then Subaru ATF or Idemitsu ATF HP are recommended.
How many quarts of oil does a 2008 Subaru Forester take?
SAE 5W-30 is preferred. Capacity: 4.4 quarts. . . . (with filter)After refill check oil level.
What kind of oil does Subaru use?
Subaru Synthetic 5W-30 Motor Oil is designed to perform safely with your Subaru engine.
How much oil does a 2013 Subaru Forester take?
Capacity: 5.5 quarts. . . . (with filter)After refill check oil level.