Land Rover

What year is my land rover?

Characters 10 to 17 are the Vehicle Identifier Section (VIS) and are used by the manufacturer to identify the individual vehicle in question. Land Rover use the 10th Character as the Model Year and the 11th as the Plant Code, the final 6 characters in the VIN are a simple sequential number.

Also, how do I know what series My Land Rover is? On the bottom portion of the side of the wing, behind the front wheel, if there is a bolt about 1″ back from the front, it is an 86″. If the bolt is about 2″ back it is an 88″. If the seam between the wing top and front piece is above the curve, it is a Series II through Defender.

Likewise, how do you read a VIN number on a Land Rover?

  1. S – Country (UK)
  2. A – Manufacturer (Land Rover)
  3. L – Vehicle Type (Passenger Car)
  4. CP2BG – Description (AWD/4DR/SUV/Land Rover Discovery Sport)
  5. 5 – Check Digit.
  6. G – Model Year (2016)
  7. H – Assembly Plant (Halewood, England)
  8. 560390 – Production Sequence Number.

Also know, where is my VIN number Land Rover? The Vehicle Identification Number (VIN) is stamped onto a plate, visible through the lowest part of the left side of the windscreen. The number is also stamped onto the right-side suspension tower.

Additionally, what does Sal mean on Vin? VIN Interpretation [NAS-North American Spec] for RR classics (only) SAL = Int’l recognized manuf ID: Land Rover UK, Ltd. HV or HE or HC or HF = wheelbase+ 49 state…

How can you tell the difference between 200Tdi and 300Tdi?

An easy way is to look at belt – the 200Tdi uses standard ‘V’ belts, whereas the 300Tdi uses a flat “Poly-Vee” serpentine belt with automatic tensioner. There are lots of other detail changes – turbo position, water pump position etc, but the belt type is a very easy check.

What is the history of Land Rover?

Land Rovers have been built since 1948, when they became the second oldest four wheel drive vehicles in automotive history after Jeeps. Back then, they were made by Rover, but Land Rover as a company wasn’t founded until 1978, as part of a really odd period of British mismanagement of the auto industry.

What are the old Land Rovers called?

Land Rover Defender (1990) To some, all classic Land Rovers are called Defender, but it wasn’t until 42 years after the arrival of the Series I that this tag was adopted to differentiate it from the new Discovery. The renamed model got a new 200 TDi turbodiesel engine, as already seen in the Discovery.

What year did the Land Rover Series 2 come out?

Series 2 – Model History. The Land-Rover Series Two was released to the world’s press on 16th April 1958.

What does a VIN number look like?

VIN is short for Vehicle Identification Number. … Autozone.com explains that a VIN is normally printed on a single line and consists of 17 characters that are made up of both numbers and letters. If your vehicle was manufactured before 1981, your VIN number may have fewer than 17 characters.

Where is the VIN number on a Discovery 1?

Vehicle Identification 1. On a plate riveted to a panel in front of the radiator.

What is a Range Rover L405?

The Range Rover (L405) is a mid-size to full-size luxury 4×4 / sport utility vehicle, made under the Land Rover brand by Jaguar Land Rover. It is the fourth generation of the original, main Range Rover series.

Where can I find my car’s VIN number?

  1. On the driver’s side dashboard – stand outside the vehicle and look at the corner where the dashboard meets the windshield.
  2. In the driver’s side door or door jamb – the VIN is usually printed on a sticker in that location.

Where is the VIN number on a Discovery 3?

The black vin stickers are easily forged. It should also be stamped in the chassis on the offside rail just at the front of the drivers door.

How can I tell what year my chassis number was made?

If your 4th VIN character is G, then it represents the Month – July. If your 5th & 6th characters are 12 it represents the Year – 2012. If your 10th VIN character is D, then it represents the Model Year – 2013.

Back to top button