Land Rover

How to turn off hdc on land rover?

HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.

Additionally, how do I turn off Hill Descent Control? System Operation The hill descent control indicator light blinks if the switch is ON and all operating conditions are not met or if the system becomes disengaged for any reason. To turn OFF the hill descent control system, push the switch to the OFF position.

Another frequent question is, where is the HDC button? The HDC button is located on the centre console. The speed limits for the HDC system are adjusted via the control buttons mounted on the right side of the steering wheel. Dependent on the vehicle’s specification, the HDC button also operates the All Terrain Progress Control (ATPC) system.

Also, what is HDC fault Land Rover? A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.

Also know, how do you turn off the HDC on a 2012 Range Rover Evoque?

  1. Press to switch HDC on and off.
  2. Press to increase the set speed.
  3. Press to decrease the set speed.

Hill Descent Control can be used when navigating steep inclines, particularly in rough terrain, which can put your vehicle at risk. Hill Start Assist is useful in any situation where you’re stopped on a hill, particularly so in bumper to bumper traffic, or driving a steep driveway or ramp.

What does hill descent control do?

Available Hill Descent Control is essentially a cruise control system that uses traction control technology with anti-lock brakes. This system continually adjusts braking pressure to help control slippage and maintain a constant preset speed while you are going down a steep grade.

What does HDC deactivated mean?

When the system is in use, your vehicle’s brake lights will also be engaged to warn any drivers behind you that your speed has lowered. … Once you reach a speed over 37 mph (60 km/h) the HDC system will automatically deactivate. You can also deactivate your vehicle’s HDC system by simply pressing the button again.

What does HDC mean in car?

Hill descent control (HDC, or hill mode descent control) is a driver-assistance system. It allows a controlled hill descent in rough terrain without any brake input from the driver.

How do you engage hill descent control?

How do I turn off ATPC?

Press and release the ATPC button again to disable the system. The button’s LED lamp and the ATPC warning lamp extinguish to confirm. The message center also displays an ATPC off confirmation message. ATPC operation is influenced by the current terrain response driving program selection.

What does vehicle lean when cornering mean?

You must stop the vehicle as soon as safety permits and switch off the engine. … If the warning icon is AMBER and accompanied by the message VEHICLE LEAN WHEN CORNERING, a fault that will result in reduced Dynamic Response performance has been detected.

How do I reset my Range Rover?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.

What is DSC Land Rover?

DSC Failure in a Land Rover Your vehicle’s DSC system, which stands for the Dynamic Stability Control system, is designed to correct and helps to counteract oversteer, understeer, and a variety of other undesirable inputs to your vehicle’s handling characteristics.

Why is my downhill assist light on?

The vehicle speed is higher than 15 mph. If the accelerator or brake pedal is depressed, the downhill assist control system will stop operating with the downhill assist control system indicator still on.

Does Downhill Assist work in reverse?

HDC systems may not work in all gears and vehicle configurations. If fitted, they will definitely work in first low and reverse, but possibly not in high range.

Back to top button