Land Rover

How to reset oil life on land rover lr2?

  1. Press and hold the trip reset button with the vehicle stationary and in a power mode less than 6 (two positions before starting engine).
  2. While holding the trip reset button, enter the vehicle into power mode 6 (one position before starting engine).

Additionally, how do you reset the oil life on a 2012 Land Rover LR2?

People also ask, how do you reset the oil life on a 2013 Land Rover LR2?

  1. With the engine off, press and hold the trip reset button.
  2. While holding the trip reset button, turn the ignition to run (one position before starting engine).
  3. Release the trip reset button within 10 seconds of turning the ignition to run.

Likewise, how do you reset the oil light on a 2011 Land Rover LR2?

  1. While holding the trip button, turn the vehicle into the ON position without turning the vehicle on.
  2. Release the TRIP RESET button within 10 seconds of turning the vehicle to the ON position.

Furthermore, how do I reset my lr2 service?

How do you reset the oil light on a 2008 Land Rover lr2?

How do you reset the oil life on a 2006 Land Rover LR3?

  1. Put the key fob into its slot.
  2. Press and hold the TRIP reset button.
  3. Turn the ignition key to the “ON” position without starting the engine.
  4. Keep press the TRIP button until SERVICE indicator start flashing and wait until it stop flashing.

How do you reset a Land Rover computer?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.

How do you check the oil on a 2011 Land Rover lr4?

How do you reset the service light on a 2013 Range Rover Sport?

  1. Turn off the cars ignition.
  2. Hold down the reset button on the dash board to zero the mileage.
  3. Turn the cars ignition on, but do not start.
  4. A menu will come up, like date/mileage.
  5. Let go and then press the button again.
  6. It will toggle through some options, then get to rst.

How do you reset the oil light on a 2014 Range Rover?

  1. Open the bonnet.
  2. Turn the ignition key to the “ON” position without starting the engine.
  3. Open the driver’s door.
  4. Hold the accelerator and brake pedals all the way down.
  5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a 2009 Range Rover?

How do I reset my Land Rover Freelander 2?

What oil does a Land Rover Freelander 2 use?

Engine Oil: Xtech 5W-30.

How do you reset a Freelander 2 ECU?

Back to top button