Land Rover

How to reset land rover bluetooth?

  1. Go to Settings menu.
  2. Select “Backup & Reset”, select “Factory data reset”
  3. Select “Reset phone” and “Erase everything”
  4. The device will then reboot.

Furthermore, how do you reset a Land Rover Infotainment?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.

People also ask, how do I pair my Land Rover Bluetooth?

  1. Check your phone’s Settings to ensure Bluetooth is activated.
  2. On the right-hand side of your InControl Touch Pro display, select “Tap to connect phone.” This makes your Land Rover discoverable.

Also, how do I delete a phone from my Range Rover?

Additionally, how do you reset a Land Rover Discovery 4? Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

How do I reset my Range Rover gearbox?

  1. Press Start button but don’t turn on the engine.
  2. Press the Accelerator down to the floor for about 15 seconds.
  3. Hit the start button again to turn off the power.
  4. Remove foot from Accelerator.
  5. Waity for 2 Mins.
  6. Start the engine and Drive.

How do I get my Range Rover out of valet mode?

  1. From the Home menu screen, select Valet.
  2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
  3. Valet mode activated is displayed to indicate that a PIN has been accepted.

How do you reset a Land Rover Defender screen?

How do you reset a Range Rover Evoque?

What is the Land Rover Bluetooth code?

Select Land Rover from the list. 3. Now enter the Bluetooth PIN 2121 into the mobile phone. The phone will pair and dock to the vehicle system.

How do I connect my iPhone to my Land Rover?

  1. Make sure Bluetooth is activated on your mobile device.
  2. Select “Tap to connect phone” on the right-hand side of your InControl Touch Pro display.
  3. Your Range Rover is now discoverable.
  4. On both your device and your InControl Touch Pro display, accept the Bluetooth pairing request.

How do I connect my Bluetooth to my Land Rover 2011?

How do I remove Bluetooth from my Range Rover?

  1. In General settings, select Bluetooth.
  2. From the list, select List of paired devices.
  3. Select the phone or device to be deleted.
  4. From the list, select Delete pairing.

How do I delete a paired device from my Range Rover Evoque?

How do I remove a phone from my Range Rover Sport?

Back to top button