Jannah Theme License is not validated, Go to the theme options page to validate the license, You need a single license for each domain name.
Land Rover

How to get a land rover radio out of safe mode?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.

Additionally, how do you enter the radio code on a Land Rover Discovery?

Also, how do I enter the radio code on a Land Rover Freelander? Press either the up or down tunning button until the first digit of the code appears in the display. Press pre-set 1 to store the first digit in the memory. Use either tunning button to select the second digit of the code [until the correct digit appears].

Likewise, why is my car radio saying safe? If a car’s battery is replaced or dead, there will be at least a short time when the radio doesn’t have power. This break in power will activate the safe code security feature, because a radio has no way of knowing whether there is a burglary in progress or a car’s battery is being removed.

Another frequent question is, how do I get my Range Rover out of valet mode?

  1. From the Home menu screen, select Valet.
  2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
  3. Valet mode activated is displayed to indicate that a PIN has been accepted.

Contents

How do you reset a Range Rover?

  1. Go to Settings menu.
  2. Select “Backup & Reset”, select “Factory data reset”
  3. Select “Reset phone” and “Erase everything”
  4. The device will then reboot.
See also:   How to replace timing belt on land rover freelander?

What is the Land Rover Bluetooth code?

Select Land Rover from the list. 3. Now enter the Bluetooth PIN 2121 into the mobile phone. The phone will pair and dock to the vehicle system.

What are the radio ten codes?

  1. 10-1 Receiving Poorly.
  2. 10-2 Receiving Well.
  3. 10-3 Stop Transmitting.
  4. 10-4 Acknowledgement.
  5. 10-5 Relay.
  6. 10-6 Busy.
  7. 10-7 Out of Service.
  8. 10-8 In Service.

Where is the radio code on a Range Rover?

Retrieving your radio code is simple. We will need your vehicle V.I.N number located on drivers side, bottom of windshield on dash. Vehicle Identification Number, usually found at the bottom of drivers side windshield. You will receive your radio unlock code via email.

How do you remove a radio from a Landrover Freelander?

How do I reset my car radio?

To do this, You have to turn your ignition to the ON position. Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes.

How do I reset the code on my car radio?

Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.

What is safe mode on a car?

Safe mode is designed to keep catastrophic damage from happening to your transmission. If the control module senses danger, it defaults the transmission into safe mode, which typically means the RPM and shifting abilities are highly limited.

What is valet mode?

Valet mode is a safety convenience feature standard on all Arctic Start remote start and security systems. Valet mode disables all system features other than lock or unlock; such as, remote start, alarm triggers, and trunk release.

What is stealth mode on a Range Rover?

Stealth mode lowers the level of interior illumination to aid with night time driving. Stealth mode can be enabled through the touchscreen’s Screensaver menu. See GENERAL SETTINGS. Once enabled, stealth mode is activated by switching the touch screen off, using the on and off button.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!