Land Rover

Frequent question – how to reset service light on land rover lr4?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

People also ask, how do you reset the service light on a 2016 Land Rover lr4?

  1. Key on, engine OFF.
  2. Open door.
  3. Open bonnet (hood)
  4. Depress the accelerator pedal simultaneously for ten seconds, release.
  5. service interval is now reset.

Also, how do you reset the oil light on a 2012 Land Rover lr4?

Likewise, how do you reset the check engine light on a lr4?

  1. Turn off your engine, apply the parking brake, and open the hood.
  2. Locate your vehicle’s negative battery terminal. Loosen the cable with a wrench, and pull it off.
  3. Keep the cable disconnected for a minute or more, and then reconnect it with your wrench.

Additionally, how do you reset the service light on a Land Rover Discovery 2017?

How do you reset the service light or indicator on a Land Rover Freelander 2?

How do you reset the service light on a Land Rover Discovery 3?

How do you check the oil on a 2016 Land Rover lr4?

How do you reset the service light on a 2015 Range Rover Sport?

How do you reset the service indicator on a Range Rover Sport?

How do you reset the service light on a 2014 Range Rover Sport?

  1. Open the bonnet.
  2. Turn the ignition key to the “ON” position without starting the engine.
  3. Open the driver’s door.
  4. Hold the accelerator and brake pedals all the way down.
  5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you reset the service light on a 2009 Range Rover?

How do you reset a Land Rover?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.

Why is my Land Rover engine light on?

Land Rover Range Rover Check Engine Light Flashing Other common reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few.

How do you clear the code on a Range Rover?

  1. use a code reader.
  2. disconnect the battery leads for a couple minutes.
  3. cycle the key on and off more than 40 times. Note, this one requires the problems to be fixed before it worksthe other 2 ways do not, although the codes will return in 2 trips, otherwise.

Back to top button