Insert the physical key into the ignition and turn to the first position WITHOUT starting the engine. Insert the key fob programmer into the OBD/DLC port under the steering column near the pedals. On the key fob, press the LOCK and UNLOCK buttons simultaneously for 3 seconds. Press the UNLOCK button for 2 seconds.
Frequent question, how do you program a key fob for a Jeep Grand Cherokee? Chrysler Key Fob Programming Press the “LOCK” button on your key fob five consecutive times, while allowing 2-second intervals between each press. Next, put your key in the ignition and turn two clicks to the “RUN” position. Hold down the “UNLOCK” button and “PANIC” button simultaneously. Release both at the same time.
Quick Answer, what is the factory part number for a 2015 Jeep Grand Cherokee Limited remote key fob? 2015 Jeep Grand Cherokee Smart Remote Key Fob 5B w/ Hatch, Remote Start M3N-40821302.
Additionally, how do I program my 2014 Jeep Grand Cherokee key fob?
As many you asked, how much does it cost to have a key fob programmed? Programming a replacement key fob can run anywhere from $50 to $100. Some dealerships may do this for free or charge a small fee. If you’ve lost your key fob, but you have the metal key, you can even get into your car and start it.
Contents
How do you program a key fob for a 2010 Jeep Grand Cherokee?
Keyless Remote Key Programming Procedure: Insert first programmed key into ignition and turn ignition switch to ON for 5 seconds. Do not exceed 15 seconds. 3. Insert second programmed key into ignition and turn ignition switch to ON.
Can you program a key fob without the original key?
You don’t need to go to a dealership to have your fob programmed but a professional locksmith IS REQUIRED if the original is not available. Absolutely, that doesn’t need a locksmith at all, dealership store can program it for free. You absolutely can.
Do you have to reprogram a key fob after battery change?
Do you have to reset key fob after changing battery? The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. … After replacing the battery in the key fob remote, you will need to reprogram the remote to the vehicle.
Why is my key fob not working after battery change?
The most common problem with these car key fobs is that the batteries just go dead over time, in which case replacing the battery should fix the problem. … Check and replace the key fob battery as needed. Take the key fob apart and check for broken contacts or misaligned buttons.
How do I get the code for my Jeep Grand Cherokee?
- Get behind the Grand Cherokee’s wheel and slide your key into the ignition. Turn the key in the following pattern: On-Off-On-Off-On.
- Grab a pen and paper and count the number times the check engine light flashes at you. It will be a code.
How do you program a key fob?
- STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
- STEP 2-Press the lock button.
- STEP 3-Turn off the ignition.
- STEP 4-Repeat the process with other key fobs.
- STEP 5-Restart the process.
How much is a replacement Jeep key fob?
Getting a new key and key fob replacement for your original set at the dealership will range from $120 to $250 (and occasionally more depending on the make and model of your car as well as the local dealership prices).
Why is my jeep key fob not working?
Test your remote to see if the battery was the problem by snapping the key fob together and trying it on your car. If this does not solve the problem, re-open the key fob and clean the contacts. These are the little golden squares on the circuitry board. … Replace the cover and try the key fob remote on your car again.
How do you program a key fob for a 2009 Jeep Grand Cherokee?
- Insert first programmed key into ignition and turn ignition switch to ON for 5 seconds.
- Turn ignition switch to OFF and remove key.
- Insert second programmed key into ignition and turn ignition switch to ON.
- Turn ignition switch to OFF and remove key.
Do aftermarket key fobs work?
Unbranded aftermarket car keys might work, however you have to heavily scrutinize them. Car key remotes may be separate or part of a key transponder key or key fob. Whatever form they take, they are intended to be used from a distance.