Jannah Theme License is not validated, Go to the theme options page to validate the license, You need a single license for each domain name.
Hyundai Sonata

How to reset a hyundai sonata?

Additionally, how do I reset my 2014 Hyundai Sonata?

People also ask, how do you reset the check engine light on a Hyundai Sonata? There are different ways to reset the check engine light on the 2018 Hyundai Sonata but sometimes it will just go off by itseLFAfter driving for a while. Another way that You can reset the check engine light on the vehicle is to unplug the battery, wait for about 20 minutes and then plug it back in.

Also know, how do I reset my 2018 Hyundai Sonata?

Another frequent question is, how do I reset my 2013 Hyundai Sonata? To perform an oil reset on the 2013 hyundai sonata you need to turn it on, but do not start the engine. Find the reset button on the console dash and hold it. When the light blinks and stops turn the vehicle off and wait 5 min. Your oil is now reset.Each time Your 2012 Hyundai Sonata is serviced, the “Service Interval” settings should be reset. Press and hold the “OK” button on the right-hand side of the steering for 5 seconds, and the Service Interval will be reset to its default settings.

Contents

How do you reset the 2016 Hyundai Sonata?

How do I reset my Hyundai?

To reset the computer in a Hyundai vehicle, open the hood and use a wrench of pliers to disconnect the positive cable from the battery. Look for the fuse that says ECM on it and remove it. Keep this removed for at least three minutes to clear the vehicle’s memory.

Where is the TPMS reset button on Hyundai Sonata?

The TPMS reset button is usually located under the steering wheel.

How do you reset the check engine light on a Hyundai?

  1. Locate the OBD-II port.
  2. Plug your OBD2 scanner into the OBD-II 16-pin port.
  3. Turn the key on.
  4. The scanner turns on.
  5. Read fault codes.
  6. Fix the problems you found in step five, reconnect the scanner, and select Clear Fault codes.

How do you reset the 2017 Hyundai Sonata?

To perform an oil reset on the 2017 hyundai sonata you need to turn it on, but do not start the engine. Find the reset button on the console dash and hold it. When the light blinks and stops turn the vehicle off and wait 5 min. Your oil is now reset.

How do I turn off Hyundai service required?

How do you reset the service light on a 2017 Hyundai Sonata?

  1. Turn the key on. The first thing you want to do you gotta make sure your car is on.
  2. Go to the SERVICE minder. In the top corner you’ll see as you press the ❏ button it will scroll through the menus.
  3. Hold down the OK button. Once there you’ll press and hold the OK button and it’ll reset.

How do you reset the service interval on a 2015 Hyundai Sonata?

How do you reset the maintenance light on a 2011 Hyundai Sonata?

You’ll first need to put the key in the ignition and give the vehicle power. Now located the OK button on Your steering wheel and hold it down for a few seconds. After a few moments the light will disappear and You should get confirmation on Your instrument panel that it has been reset.

Where is the tpms reset button on a Hyundai Santa Fe?

To the right of the steering wheel is a button that will be labeled tpms or something close. Hit this and hold it down until it begins to blink.

See also:   How to reset hyundai sonata radio 2016?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!