- Unplug the power cord of the CD player from the AC wall outlet.
- Allow the CD player to set without power for 30 seconds.
- Plug the power cord of the CD player back into the AC wall outlet.
Beside above, how do you get a stuck CD out of a Honda Odyssey? Press and hold in the “Eject” button on the player’s control panel with your free hand. Push down on the shutter to catch an edge of the stuck CD’s center hole. Pull the shutter out of the front-loading slot. Stop pulling the shutter when an edge of the CD can be seen.
Also, how do you reset the radio on a Honda Odyssey?
- Turn the ignition key to the “On” position, but don’t start the engine.
- Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
Additionally, how do you fix CD player that won’t read CDs? Unplug the power cord of the CD player from the AC outlet for 30 seconds. Plug the power cord back into the AC outlet. Turn on the CD player and attempt to play the disc. If the issue is still not resolved, remove the disc and unplug the power cord from the AC outlet.
Furthermore, where is the reset button on my car CD player? Remove the faceplate from your car stereo. Press the RESET button on the front panel using a pointed object, such as a ball-point pen.
How do I get my CD player to work?
How do you get a stuck CD out?
How do you get a stuck CD out of a 6 CD?
Find a blank disc or a disc that you don’t use anymore. Insert this disc about an inch deep into the slot where the discs go in. This step will not work for audio players that use trays to mount discs. Now, move the disc gently sideways while pushing the eject button repeatedly until the discs come out.
How do I fix my CD player drawer?
How do I fix the radio error code on my Honda Odyssey?
If the radio displays and error (ERR) message, disconnect the black negative under hood battery cable for 1 to 3 minutes to reset the system). TURN THE RADIO BACK ON AND LOOK FOR THE WORD “CODE”. ENTER THE 5 DIGIT RADIO CODE. THE RADIO SHOULD COME BACK ON.
How do you reset the code on a Honda Odyssey?
Why does my Honda Odyssey radio say code?
The number one reason your Honda will ask for a radio code is when you replace the battery. Every time the battery is disconnected or becomes completely dead the radio will ask for the code. … If this does not work then you will have to enter the Radio Code.
Why would a CD player stop working?
A scratched or damaged disc is often the culprit and not the player. Use a newer disc if possible to ensure the condition is pristine. If the problem persists with the new disc, remove all discs and run a power cycle to reset the player. Remove any batteries or unplug it to drain the power.
Why does my CD player stop and start?
If a CD is skipping, first ensure that the disc is working properly by checking to see if it plays on another device. … Some common problems include: broken parts in the device, physical damage to the CD player, dirt within the player or, most commonly, damage to the lens.
Why won’t my CD player read some discs?
Sometimes a CD player will display a “No Disc” error. What this means is that the CD player, for some reason, does not recognize the disc. There are various reasons for this error, from the CD lens eye being dirty to a CD format that is incompatible with the player. Troubleshoot through process of elimination.