- Switch the ignition over to the on position.
- Go to the SETTINGS menu.
- Scroll and select VEHICLE.
- Scroll down to OIL LIFE RESET.
- Press and hold the OK button.
- Shut the vehicle off and then start it back up and check the oil change light should be gone.
Likewise, how do you reset the oil change light on a Ford Explorer? Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
People ask also, how do you reset the oil light on a 2017 Ford Explorer?
Also, how do you reset the oil change light on a 2015 Ford Explorer?
Also know, how do I reset my oil change light?
- Open the hood: release the primary latch by pulling the release lever under the steering wheel near the floor board.
- Disconnect the negative battery terminal.
- Wrap the negative clamp in a towel.
- Leave the negative battery cable off for a minimum of five minutes.
Contents
How do I reset my 2016 Ford Explorer?
What does it mean to change engine oil?
An Oil Change is the act of removing the used oil in your engine and replacing it with new, clean oil. … These factors make oil much less slippery and less effective at their job of lubricating engine parts. That’s why it’s important to change your oil according your car’s specifications.
How do you reset the oil change light on a 2011 Ford Explorer?
To reset the ford explorer oil life light, put the ignition into on without starting engine. Use the pad on the steering wheel to scroll through the settings. Go to settings, vehicle, oil life reset. Push and hold ok.
How do you reset the change oil light on a 2013 Ford Explorer?
How do you reset the oil change light on a 2010 Ford Explorer?
Why is my change oil light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. … The next common cause is low oil pressure.
Why does my change oil light keep coming on?
When the oil light on your dashboard comes on, it might mean your vehicle has low oil pressure. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.
To reset the fuel light on a ford explorer you will need to access the fuel reset switch which is located in the glove box or in the foot well of the passenger seat area, press that switch and the fuel system will be reset.
How do you clear the code on a Ford Explorer?
The first way is to connect an OBD-II scan tool and clear the trouble codes, so long as they are not permanent codes. Another is to disconnect the battery for at least 10 to 15 minutes. Once the power is reconnected, the light should have reset.
Can you drive with wrench light on?
It is suggested that you have your car towed into a mechanic’s garage, or, if you are one of the lucky few who still have your car on and able to drive, you drive your vehicle to a garage immediately. It is unsafe to drive with this light on for long as it may stall and won’t come back on at any given moment.