First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.
Also, how do I turn off Pats?
- Step 1 – What You Will Need. Following are the things that you need to disable the Ford PATS system:
- Step 2 – Cut the Keys. The second step is to have the keys cut by a local dealer.
- Step 3 – Take Out the Transponder.
- Step 4 – Disable PATS System.
People ask also, how do you bypass the security system on a 2000 Ford Explorer? Allow the driver’s door to be locked for at least 30 seconds, then use the key in the door cylinder to unlock it. This should clear anything that is wrong with the alarm system.
Likewise, how do I reset my Ford Explorer Pats? Cycle a key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Parameter Reset” and then Exit Security Access. Perform a PCM Keep Alive Memory (KAM) reset.
Also know, how do I get my car out of anti theft mode? Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
How do I disable anti theft?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
How do I reset my Pats system?
To reset the pats system, turn on the ignition and hold reset for about 5 seconds until a word testt shows up. Then push reset repeatedly until it shows dtc and read the code if there is one. After done, turn the ignition off. It should reset automatically.
How do I reset my Ford Anti theft system?
Turn the ignition to the off position and remove the second coded key from the ignition. After three seconds and before 20 seconds, insert the new uncoded key into the ignition. Turn the ignition to the on position and keep it on for at least 6 seconds. Remove the newly coded key from the ignition.
Can you bypass transponder key?
While it is possible to bypass your car’s immobilizer, it is not recommended. Doing so will leave your car vulnerable to theft and vandalism, since this important feature will no longer be active.
How do you bypass a Ford security system?
Yes, there is a simple way to bypass the pats system on your own. All you need is the transponder key to trick the system. By having the transponder key, you can remove the chip inside the key and glue it to the ignition and use any key that matches the original to start up the engine.
How do I get my 2001 Ford Explorer out of theft mode?
Press the panic button one time. Now, go to the driver’s side of Your car, and get inside. Place Your physical key into the ignition key hole, and turn it to the on position three times in a 10 second period. Now, start the engine, and the anti-theft system should be reset.
How do you reset the theft system on a 2002 Ford Explorer?
First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.
What is Ford Pats disable?
In all vehicles, it disables the injectors. In certain vehicles, it also disables the starter. If the THEFT light is fast-flashing during your starting attempt, its a PATS event.
How do I reset my Ford Securilock?
- Enter your vehicle with your ignition key and remote and insert your key into the ignition.
- Turn the ignition key from “Off” to “Run” eight times in the first 10 seconds, and end the eighth turn in the “Run” position.
How do I reset my Ford Anti theft system with one key?
Put one into the ignition, and turn it to “ON”. Cycle it back to “OFF” and remove. Immediately insert the second key (within 5 seconds) and cycle it to “ON” and “OFF” as well. Insert the original key back within 10 seconds, leave it “ON” for one second, and then cycle back to off.