The first thing You will need to do is sit down in the driver’s side of Your vehicle. Next, access the navigation Audio prompts via the screen at the center of Your infotainment system. Now, push the menu button. Choose the “navigation voice preferences” option, and then “unmute”.
Contents
Why is my radio not working in my Chevy Traverse?
The most common problem that You will encounter with a 2019 Chevy Traverse is a software problem. When the software to the head unit freezes up then the radio will not work properly and the only way to fix it is to restart it. … Another problem that can come up with the radio is that a fuse to it will blow.
How do I reset my Chevy radio?
To reset your Chevy MyLink system entirely, hold down the Home and Fast Forward buttons simultaneously for 10 seconds. This should reboot the system and resolve any problems that you’re having.6 jui. 2021
How do you adjust the speakers on a Chevy Traverse?
1. Press. f until the speaker. control tabs display.
2. Continue pressing. f to. highlight the tab, or press the. softkey under the tab.
3. To adjust the highlighted.
How do you unmute the volume on a Chevy Malibu?
Press to mute/unmute the speakers. Press the top or bottom button to adjust the volume. Press the top or bottom button to go to the next or previous favorite radio station or track.
Why does my radio turn on but no sound?
Typically when a car stereo produces no sound it’s usually caused by a shorted or grounded wire, defective speakers, faulty head unit/fuses, or setup is not yet complete with your radio unit.15 jan. 2020
Why did my car radio suddenly stop working?
Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. If the radio itself will not turn on, chances are good that there’s one or more blown fuses causing the problem. … A damaged antenna means that your radio isn’t able to receive signal from stations.
How do I reset my car radio?
To do this, You have to turn your ignition to the ON position. Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes.9 jui. 2021
Where is the amplifier in a 2009 Chevy Traverse?
The 2009 Chevy Traverse amplifier location is behind the dash, near the glove box. If it is not working then You will need to check the fuse box. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open.
How do you unlock a Chevy radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How do you reprogram a GM radio?
1. Turn on your car.
2. Press and hold down both the second and third preset buttons.
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display.