Beside above, how do you reset the maintenance light on a 2015 Prius?
Quick Answer, how do you reset the maintenance required light on a Toyota Prius? Turn the vehicle completely off. Press and hold the “Trip” or “MPH” button. Continue to hold the “Trip” or “MPH” button while switching the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
People ask also, how do you reset the maintenance light on a 2014 Prius?
You asked, how do you reset the maintenance light on a 2015 Toyota Corolla? To reset the 2015 Toyota Corolla S maintenance light put the key in the on position, turn the key off, press and hold the odo/reset button and turn the key back to the on position without starting the engine.
Contents
How do you reset oil change light?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Press the the gas pedal slowly to the floor three successive times within 10 seconds. Turning the ignition off. If the light is still on the next time you start the truck, repeat the process.
How do I reset the maintenance light on a 2013 Prius?
How do you reset the maintenance light on a 2013 Prius?
How do I reset the maintenance required light on a 2013 Prius?
Why is my maintenance required light on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do you turn off the maintenance required light on a Toyota push start?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.